A desk lamp is connected to the 230 V mains supply. The current in the lamp is 0.25 A.
Calculate the power of the lamp.
Equation: power = potential difference × current
Aligned to AQA Combined Science 8464 and AQA GCSE Physics 8463
P = VI, P = I^2R, E = Pt and E = QV (recalled), kW and hours to W and s, choosing the right equation, Higher tier transformer equation Vp Ip = Vs Is (given).
15 original questions, 44 marks. Type your answers below for an instant mark (give the unit or just the number), or print the worksheet, mark it with the answers sheet, and use the solutions to see every step written out by hand.
A desk lamp is connected to the 230 V mains supply. The current in the lamp is 0.25 A.
Calculate the power of the lamp.
Equation: power = potential difference × current
The heating element in a hand warmer has a resistance of 15 Ω. The current in the element is 4.0 A.
Calculate the power of the heating element.
Equation: power = (current)2 × resistance
A charge of 60 C flows through a 12 V car headlight bulb.
Calculate the energy transferred to the bulb.
Equation: energy transferred = charge flow × potential difference
Amara boils water in a 2.8 kW kettle. The kettle is switched on for 3 minutes.
Calculate the energy transferred by the kettle in joules.
Equation: energy transferred = power × time
A phone charger supplies a potential difference of 5.0 V. The current in the charging cable is 800 mA.
Calculate the power supplied to the phone.
Equation: power = potential difference × current
A television has a power of 120 W. Callum watches it for 2.5 hours.
Calculate the energy transferred by the television in joules.
Give your answer in standard form.
Equation: energy transferred = power × time
A hairdryer has a power of 2000 W. It is connected to the 230 V mains supply.
Calculate the current in the hairdryer.
Give your answer to 2 significant figures.
Equation: power = potential difference × current
In a Year 10 practical, 1500 J of energy is transferred when a charge of 125 C flows through a motor.
Calculate the potential difference across the motor.
Equation: energy transferred = charge flow × potential difference
A resistor in a circuit transfers energy at a rate of 36 W when the current in it is 3.0 A.
Calculate the resistance of the resistor.
Equation: power = (current)2 × resistance
The motor of an e-scooter is connected to a 36 V battery. The current in the motor is 6.0 A for a journey of 20 minutes.
Equation: charge flow = current × time
Equation: energy transferred = charge flow × potential difference
A kettle is connected to the 230 V mains supply. The current in the kettle is 11 A. The kettle is switched on for 4 minutes.
Calculate the energy transferred by the kettle in kilojoules (kJ).
Give your answer to 3 significant figures. Show your working.
Equation: power = potential difference × current
Equation: energy transferred = power × time
Higher tier
A step-down transformer in a phone charger has a primary potential difference of 230 V and a primary current of 0.020 A. The secondary potential difference is 5.0 V.
The transformer is 100% efficient.
Calculate the current in the secondary coil. Show your working.
Equation (on the equation sheet): potential difference across primary coil × current in primary coil = potential difference across secondary coil × current in secondary coil
Higher tier
A power station generates electricity at a potential difference of 25 kV and a current of 400 A. A step-up transformer increases the potential difference to 400 kV before the electricity is sent along the National Grid.
The transformer is 100% efficient.
Equation (on the equation sheet): potential difference across primary coil × current in primary coil = potential difference across secondary coil × current in secondary coil
Equation: power = (current)2 × resistance
Two lamps, A and B, are connected in series to a 12 V battery. The potential difference across lamp A is 7.5 V. The current in the circuit is 0.40 A.
Calculate the power of lamp A.
Equation: power = potential difference × current
A phone charger has an output potential difference of 5.0 V. The charging cable has a resistance of 0.25 Ω. The current in the cable is 2.0 A.
Calculate the power wasted heating the cable.
Equation: power = (current)2 × resistance
Answer the questions above and your score appears here.
Every question here is original and written by Robinson Tuition. Aligned to AQA Combined Science 8464 and AQA GCSE Physics 8463; this is not an exam-board paper and is not endorsed by AQA.