Robinson Tuition
Physics Paper 1 · free recall questions

Particle model of matter: recall questions

Aligned to AQA Combined Science 8464 and AQA GCSE Physics 8463

30 quick questions. Type a word, a name or a number and press Check. Spelling counts for scientific words, capitals and spaces do not.

Questions PDFAnswers PDF

The questions

1

Density

What is the name for the mass per unit volume of a material? Answer in one word.

1 mark
Show answer

density

Density tells you how tightly the mass is packed into the space a material takes up.

2

Density

Complete the word equation: density = mass ÷ ...

1 mark
Show answer

volume

ρ = m ÷ V. The Greek letter rho is the symbol for density.

3

Density

What is the SI unit of density? Give the unit, not the name.

1 mark
Show answer

kg/m3

Mass in kilograms divided by volume in cubic metres. g/cm³ is also common in the lab.

4

Density

A block has a mass of 6 kg and a volume of 0.002 m3. What is its density in kg/m3?

1 mark
Show answer

3000

6 ÷ 0.002 = 3000 kg/m³, about the density of a dense rock.

5

States of matter

In which state of matter are the particles furthest apart, so it usually has the lowest density?

1 mark
Show answer

gas

Gas particles are spread out with lots of empty space, so the same mass fills a much bigger volume.

6

States of matter

In which state are the particles held in fixed positions in a regular pattern, only vibrating?

1 mark
Show answer

solid

Solid particles vibrate about fixed points - that is why solids keep their shape.

7

States of matter

When ice melts into water, does the mass increase, decrease or stay the same?

1 mark
Show answer

stays the same

Mass is conserved in a change of state - the particles are rearranged, not created or destroyed.

8

States of matter

What is the name for a gas changing directly into a solid without becoming a liquid first?

1 mark
Show answer

deposition

Think of frost forming straight from water vapour on a cold car window. The reverse, solid straight to gas, is sublimation.

9

States of matter

What is the name for a solid changing directly into a gas?

1 mark
Show answer

sublimation

Dry ice (solid carbon dioxide) does this at room pressure, making a stage fog.

10

States of matter

Is a change of state a physical change or a chemical change?

1 mark
Show answer

physical

The material gets back its original properties if the change is reversed, so it is physical.

11

Internal energy

What is the name for the total kinetic energy and potential energy of all the particles in a system? Answer in two words.

1 mark
Show answer

internal energy

Kinetic from the particles moving, potential from the forces between them - add both together.

12

Internal energy

Heating a substance raises the internal energy. If the state does not change, what else rises? Answer in one word.

1 mark
Show answer

temperature

Heating either raises the temperature or changes the state - not both at once.

13

Internal energy

While a solid is melting, does its temperature rise, fall or stay the same?

1 mark
Show answer

stays the same

The energy goes into breaking bonds between particles, so the heating curve goes flat.

14

Internal energy

Which store of the particles increases while a substance is melting at constant temperature: kinetic or potential?

1 mark
Show answer

potential

Kinetic energy links to temperature. A flat line on a heating curve means only potential energy is rising.

15

Specific heat capacity

What is the name for the energy needed to raise the temperature of 1 kg of a substance by 1 °C? Answer in three words.

1 mark
Show answer

specific heat capacity

Water has a very high value, about 4200 J/kg °C, which is why seas warm up slowly.

16

Specific heat capacity

In ΔE = m c Δθ, what does the symbol Δθ stand for? Answer in three words.

1 mark
Show answer

temperature change

θ (theta) is temperature and Δ (delta) means change in.

17

Specific heat capacity

How much energy, in joules, raises 2 kg of a liquid with specific heat capacity 1000 J/kg °C by 5 °C?

1 mark
Show answer

10000

2 × 1000 × 5 = 10 000 J. Multiply mass, specific heat capacity and temperature change.

18

Specific latent heat

What is the name for the energy needed to change the state of 1 kg of a substance with no change in temperature? Answer in three words.

1 mark
Show answer

specific latent heat

Latent means hidden: the energy goes in but the thermometer reading does not move.

19

Specific latent heat

What is the specific latent heat called for the change from solid to liquid?

1 mark
Show answer

specific latent heat of fusion

Fusion means melting. The liquid to gas one is the latent heat of vaporisation.

20

Specific latent heat

What is the specific latent heat called for the change from liquid to vapour?

1 mark
Show answer

specific latent heat of vaporisation

Vapour links to vaporisation. It is usually much bigger than the value for melting.

21

Specific latent heat

How much energy, in joules, is needed to melt 0.5 kg of a solid with specific latent heat 300 000 J/kg?

1 mark
Show answer

150000

E = m L, so 0.5 × 300 000 = 150 000 J.

22

Specific latent heat

What is the unit of specific latent heat?

1 mark
Show answer

J/kg

There is no °C in this unit because the temperature does not change.

23

Particle motion in gases

If a gas is heated at constant volume, what happens to the average kinetic energy of its particles?

1 mark
Show answer

increases

Temperature of a gas is linked to the average kinetic energy of its particles.

24

Particle motion in gases

A sealed container of gas is warmed with the volume kept the same. What happens to the pressure?

1 mark
Show answer

increases

Faster particles hit the walls harder and more often, so the force on each square metre rises.

25

Particle motion in gases

Explain in one sentence how gas particles cause pressure on the walls of a container.

1 mark
Show answer

The moving particles collide with the walls and each collision exerts a force, giving a total force at right angles to the walls per unit area.

Force from collisions, acting at right angles to the wall - that is pressure.

26

Pressure in gases Triple only

A fixed mass of gas at constant temperature is squashed into a smaller volume. What happens to its pressure?

1 mark
Show answer

increases

Same particles in less space hit the walls more often. pV stays constant.

27

Pressure in gases Triple only

For a fixed mass of gas at constant temperature, pressure × volume = ...? Answer in one word.

1 mark
Show answer

constant

Halve the volume and the pressure doubles, so the product does not change.

28

Pressure in gases Triple only

A gas at 100 kPa has a volume of 3 m3. At the same temperature it is compressed to 1 m3. What is the new pressure in kPa?

1 mark
Show answer

300

p1V1 = p2V2, so 100 × 3 = p × 1, giving 300 kPa.

29

Increasing the pressure of a gas Triple only

Higher tier

When a bicycle pump quickly compresses air, work is done on the gas. What happens to the temperature of the gas?

1 mark
Show answer

increases

Work done on the gas raises its internal energy, which is why a pump barrel feels warm.

30

Increasing the pressure of a gas Triple only

Higher tier

Explain in one sentence why doing work on a gas raises its temperature.

1 mark
Show answer

The work done transfers energy to the gas, increasing the internal energy and so the average kinetic energy of the particles.

Work done is energy transferred - here it ends up in the particles' kinetic store.

Your score

Answer the questions above and your score appears here.

Every question here is original and written by Robinson Tuition. Aligned to the AQA GCSE science specifications; not exam-board material and not endorsed by AQA.