In a titration, the burette reading at the start is 0.50 cm3. At the end point the burette reading is 23.70 cm3.
Calculate the titre.
Equation: titre = final burette reading - initial burette reading
Aligned to AQA GCSE Chemistry 8462 only (not Combined Science)
Separate Chemistry only: burette readings and titres, mean titre from concordant results, Higher tier concentration in mol/dm³, moles in a titre, the concentration of an unknown acid or alkali, converting mol/dm³ to g/dm³.
12 original questions, 33 marks. Type your answers below for an instant mark (give the unit or just the number), or print the worksheet, mark it with the answers sheet, and use the solutions to see every step written out by hand.
In a titration, the burette reading at the start is 0.50 cm3. At the end point the burette reading is 23.70 cm3.
Calculate the titre.
Equation: titre = final burette reading - initial burette reading
Zainab does not refill her burette between two titrations. The table shows her readings for the second titration.
| Burette reading in cm3 | |
|---|---|
| Initial | 12.35 |
| Final | 36.80 |
Calculate the titre for the second titration.
Equation: titre = final burette reading - initial burette reading
Leon does a titration five times. His titres are shown in the table.
| Titration | Rough | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Titre in cm3 | 25.60 | 24.90 | 24.95 | 25.40 | 24.85 |
Concordant results are within 0.10 cm3 of each other.
Calculate the mean titre using only the concordant results.
Equation: mean titre = sum of concordant titresnumber of concordant titres
Chloe's titration results are shown in the table.
| Rough | 1 | 2 | 3 | |
|---|---|---|---|---|
| Final reading in cm3 | 26.10 | 26.65 | 26.10 | 27.75 |
| Initial reading in cm3 | 0.00 | 1.20 | 0.45 | 2.30 |
Concordant results are within 0.10 cm3 of each other.
Equation: titre = final burette reading - initial burette reading
Equation: mean titre = sum of concordant titresnumber of concordant titres
Higher tier
A pipette delivers 25.0 cm3 of sodium hydroxide solution into a conical flask. The concentration of the sodium hydroxide solution is 0.100 mol/dm3.
Calculate the number of moles of sodium hydroxide in the flask.
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
Dev's mean titre is 22.40 cm3 of hydrochloric acid. The concentration of the acid is 0.150 mol/dm3.
Calculate the number of moles of hydrochloric acid in the mean titre.
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
A quality-control chemist at a vinegar factory dilutes a sample of vinegar ten times with water. A 20.0 cm3 portion of the diluted solution contains 0.00180 mol of ethanoic acid.
Calculate the concentration of ethanoic acid in the diluted solution in mol/dm3.
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
Mrs Adeyemi predicts that 0.00450 mol of nitric acid will be needed to neutralise the alkali in a flask. The nitric acid has a concentration of 0.200 mol/dm3.
Calculate the volume of nitric acid needed, in cm3.
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
A bottle of dilute hydrochloric acid, HCl, is labelled 7.30 g/dm3.
Relative atomic masses (Ar): H = 1, Cl = 35.5
Calculate the concentration of the acid in mol/dm3.
Equation: concentration (mol/dm3) = concentration (gdm3)/Mr
Higher tier
Tobi titrates 25.0 cm3 of sodium hydroxide solution with hydrochloric acid of concentration 0.120 mol/dm3. The mean titre is 21.60 cm3.
NaOH + HCl → NaCl + H2O
Calculate the concentration of the sodium hydroxide solution in mol/dm3.
Give your answer to 3 significant figures. Show your working.
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
Priya puts 25.0 cm3 of 0.150 mol/dm3 sodium hydroxide solution in a conical flask. She titrates it with sulfuric acid from a burette.
| Titration | Rough | 1 | 2 | 3 |
|---|---|---|---|---|
| Titre in cm3 | 19.20 | 18.60 | 19.05 | 18.70 |
Concordant results are within 0.10 cm3 of each other.
H2SO4 + 2NaOH → Na2SO4 + 2H2O
Equation: mean titre = sum of concordant titresnumber of concordant titres
Equation: concentration (mol/dm3) = molesvolume (dm3)
Higher tier
A water treatment works checks a potassium hydroxide solution. A chemist titrates 25.0 cm3 of the solution with nitric acid of concentration 0.0800 mol/dm3.
KOH + HNO3 → KNO3 + H2O
Relative atomic masses (Ar): H = 1, O = 16, K = 39
Equation: concentration (mol/dm3) = molesvolume (dm3)
Equation: concentration (g/dm3) = concentration (mol/dm3) × Mr
Answer the questions above and your score appears here.
Every question here is original and written by Robinson Tuition. Aligned to AQA GCSE Chemistry 8462 only (not Combined Science); this is not an exam-board paper and is not endorsed by AQA.