Aligned to AQA GCSE Chemistry 8462 only (not Combined Science)
To identify the positive and negative ions in unknown ionic compounds using flame tests, sodium hydroxide, and tests for carbonate, halide and sulfate ions.
14 original questions, 35 marks. Try each one, then open the model answer and mark yourself against the marking points. Or print the sheet and mark it with the answers sheet. The full method is in the revision notes at the bottom.
Equipment: nichrome wire loop in a handle; Bunsen burner and heatproof mat; dilute hydrochloric acid (to clean the wire); test tubes and test tube rack; dropping pipettes; sodium hydroxide solution (dilute); dilute nitric acid and silver nitrate solution; barium chloride solution; limewater and a delivery tube; safety goggles.
Hassan was given six unlabelled white or coloured solids, P to U. He made a solution of each and carried out every test. A dash means no change.
Sample
Flame colour
Add sodium hydroxide
Add dilute acid, then gas through limewater
Add nitric acid then silver nitrate
Add hydrochloric acid then barium chloride
P
Crimson
-
Fizzes; limewater turns milky
-
-
Q
Green
Blue precipitate
-
White precipitate
-
R
No clear colour
Green precipitate
-
-
White precipitate
S
Lilac
-
-
Cream precipitate
-
T
Orange-red
White precipitate
-
Yellow precipitate
-
U
Yellow
-
-
-
White precipitate
The questions
1
Explain why the wire loop is dipped in hydrochloric acid and held in the flame before each flame test.
2 marks
Show the model answer
It cleans the loop by removing traces of the previous sample. Otherwise, metal ions left on the wire would add their own colour to the flame and give a wrong result.
Marking points
Cleans the wire / removes earlier sample
Prevents contamination giving a false flame colour
2
Give two things Hassan should do to make sure each test is fair and his results can be trusted.
2 marks
Show the model answer
Use clean test tubes and a clean loop for each sample, and add the same volume of sample and the same number of drops of reagent each time.
Marking points
Clean equipment for each sample (no contamination)
Same volume of sample / same amount of reagent each time
3
Barium chloride solution is toxic. Describe how Hassan should reduce the risk when he uses it.
2 marks
Show the model answer
Use only a few drops from a dropping pipette and wear goggles. Wash his hands after the practical and never eat or drink in the laboratory.
Marking points
Small amounts, dropping pipette, goggles
Wash hands / no eating or drinking
4
Name the compound in sample S. Explain how the results show this.
2 marks
Show the model answer
Potassium bromide. The lilac flame shows potassium ions, and the cream precipitate with silver nitrate shows bromide ions.
Sample T gave a white precipitate with sodium hydroxide. This could be calcium, magnesium or aluminium ions. Explain how the results show it is calcium, and describe a further test that would rule out aluminium.
2 marks
Show the model answer
The orange-red flame shows calcium ions. To rule out aluminium, add more sodium hydroxide: an aluminium hydroxide precipitate would dissolve in excess, but calcium hydroxide stays.
Marking points
Orange-red flame shows calcium
Add excess sodium hydroxide: precipitate stays (aluminium hydroxide would dissolve)
7
Explain why dilute hydrochloric acid is added before barium chloride in the sulfate test.
2 marks
Show the model answer
The acid reacts with any carbonate ions and removes them as carbon dioxide. Carbonate ions would also form a white precipitate with barium ions and give a false positive result.
Marking points
Removes carbonate ions
Carbonates would also give a white precipitate (false positive)
8
The white precipitate in the halide test on sample Q is silver chloride, AgCl. Calculate its relative formula mass (Mr). Relative atomic masses: Ag = 108, Cl = 35.5.
2 marks
Show the model answer
143.5
Mr of AgCl = 108 + 35.5
Mr of AgCl = 143.5
Marking points
108 + 35.5
143.5
9
The white precipitate from sample U with barium chloride is barium sulfate, BaSO4. Calculate its Mr. Relative atomic masses: Ba = 137, S = 32, O = 16.
2 marks
Show the model answer
233
Mr of BaSO4 = 137 + 32 + (4 x 16)
Mr = 137 + 32 + 64
Mr = 233
Marking points
137 + 32 + (4 x 16)
233
10
Higher tier
Hassan filtered, dried and weighed the barium sulfate from a sample of U. He got 0.466 g. Use your answer to question 9 to calculate the number of moles of barium sulfate. Give your answer in standard form. Show your working.
3 marks
Show the model answer
2.00 x 10-3 mol
Moles = mass / Mr
Moles = 0.466 / 233
Moles = 0.00200
Moles = 2.00 x 10-3 mol
Marking points
Moles = mass / Mr
0.466 / 233 = 0.00200
2.00 x 10-3 mol
11
Higher tier
Write a balanced ionic equation, with state symbols, for the formation of the blue precipitate in sample Q.
2 marks
Show the model answer
Cu2+(aq) + 2OH-(aq) → Cu(OH)2(s)
Marking points
Correct ions and formula of copper(II) hydroxide, balanced
State symbols: (aq), (aq), (s)
12
Hassan's partner used hydrochloric acid instead of nitric acid before adding silver nitrate to sample U. She got a white precipitate and decided U was a chloride. Explain her mistake.
2 marks
Show the model answer
Hydrochloric acid contains chloride ions, so these reacted with the silver nitrate and made white silver chloride. The precipitate came from the acid, not from the sample, so it was a false positive.
Marking points
Hydrochloric acid adds chloride ions
So a white precipitate forms whatever the sample is (false positive)
13
A sample contains a mixture of sodium and potassium ions. Explain why a flame test cannot easily identify both, and suggest an instrumental method that would.
3 marks
Show the model answer
The strong yellow flame from sodium hides the lilac colour from potassium, so only sodium is seen. Flame emission spectroscopy would work: it splits the light into a line spectrum, and each metal ion has its own pattern of lines, so both can be identified even in a mixture.
Marking points
Sodium's yellow colour masks potassium's lilac
Flame emission spectroscopy
Gives a line spectrum unique to each ion, so both can be identified (and it is more sensitive)
14
A technician has three bottles that have lost their labels. She knows they are iron(III) chloride solution, magnesium sulfate solution and sodium iodide solution, but not which is which. Describe how you would use chemical tests to work out which bottle is which.
6 marks
Show the model answer
Wear goggles. Put about 2 cm3 of each solution into separate labelled test tubes and add a few drops of sodium hydroxide solution. Iron(III) chloride gives a brown precipitate. Magnesium sulfate gives a white precipitate that does not dissolve when more sodium hydroxide is added. Sodium iodide gives no precipitate. To confirm, take fresh samples. Add dilute nitric acid and then silver nitrate: iodide gives a yellow precipitate and chloride gives a white one. Add dilute hydrochloric acid and then barium chloride to a fresh sample of the third solution: a white precipitate shows sulfate. A flame test on sodium iodide would also give a yellow flame. Clean the equipment between samples so they do not contaminate each other.
Marking points (any 6, with the method in a logical order)
Sodium hydroxide added to each sample
Brown precipitate = iron(III)
White precipitate (not dissolving in excess) = magnesium
No precipitate = sodium compound
Nitric acid then silver nitrate: yellow = iodide, white = chloride
Hydrochloric acid then barium chloride: white precipitate = sulfate
Flame test: yellow for sodium
Fresh samples / clean equipment for each test; goggles worn
How it is marked
5-6 marks: clear tests that tell all three solutions apart, with the correct result for each, and a confirming test for the negative ions, set out logically.
3-4 marks: correct tests and results that identify at least two of the solutions, with some results or reagents missing.
1-2 marks: one or two correct tests or results, but not enough to tell the bottles apart.
Revision notes: the method in full
Aim: To identify the positive and negative ions in unknown ionic compounds using flame tests, sodium hydroxide, and tests for carbonate, halide and sulfate ions.
Equipment
nichrome wire loop in a handle
Bunsen burner and heatproof mat
dilute hydrochloric acid (to clean the wire)
test tubes and test tube rack
dropping pipettes
sodium hydroxide solution (dilute)
dilute nitric acid and silver nitrate solution
barium chloride solution
limewater and a delivery tube
safety goggles
Method
Flame test: dip a clean nichrome wire loop in dilute hydrochloric acid, then into the solid sample, and hold it at the edge of a blue Bunsen flame. Record the flame colour. Clean the loop in acid between samples.
Metal hydroxides: add about 2 cm3 of the sample solution to a test tube, then add a few drops of sodium hydroxide solution. Record the colour of any precipitate.
Carbonates: add dilute hydrochloric acid to a small amount of the sample. If it fizzes, bubble the gas through limewater; carbon dioxide turns it milky.
Halides: add dilute nitric acid to the sample solution, then a few drops of silver nitrate solution. Record the colour of any precipitate.
Sulfates: add dilute hydrochloric acid to the sample solution, then a few drops of barium chloride solution. A white precipitate shows sulfate ions.
Use fresh sample and a clean test tube for each test.
Put the results together in a table and name each compound from its positive and negative ions.
Variables
Independent: The unknown compound being tested.
Dependent: The observations: flame colour, precipitate colour, fizzing and limewater result.
Control: Volume of sample solution in each test tube; Same reagents and number of drops for each test; Clean wire loop and clean test tubes for every sample; Same part of the flame used for every flame test
Hazards
Hazard
What could happen
How to reduce the risk
Sodium hydroxide solution
Irritant or corrosive to eyes and skin
Wear goggles and wash splashes off straight away
Silver nitrate solution
Stains and irritates the skin; harmful to the eyes
Use a dropping pipette, wear goggles and gloves if available
Barium chloride solution
Toxic if swallowed
Use small volumes, do not eat or drink, wash hands afterwards
Hot nichrome wire in the Bunsen flame
Burns
Hold the insulated handle and let the loop cool on a heatproof mat
Hydroxide precipitates: copper(II) blue, iron(II) green, iron(III) brown; aluminium, calcium and magnesium white, and only the aluminium one dissolves in excess sodium hydroxide.
Halides with silver nitrate: chloride white, bromide cream, iodide yellow.
Nitric acid goes in before silver nitrate, and hydrochloric acid before barium chloride, to remove carbonate ions that would also give a precipitate.
Never use hydrochloric acid before silver nitrate: it adds chloride ions and gives a false white precipitate.
A mixture of metal ions can hide flame colours (for example a strong yellow can hide others).
Every question and data set here is original and written by Robinson Tuition. Aligned to AQA GCSE Chemistry 8462 only (not Combined Science); this is not an exam-board paper and is not endorsed by AQA.