SHM from x'' = -ω^2 x, damping (light, critical, heavy), forced oscillations, interpretation of a model.
12 original questions, 106 marks. Type your answers below for an instant mark and a score (algebra in any equivalent form, e.g. 2sqrt(3) or 2√3), or print the worksheet, mark it with the answers sheet, and use the solutions to see every step written out by hand.
A particle P moves along the x-axis. At time t seconds its displacement from the origin O is x metres, where
d2xdt2 = −16x
When t = 0, P is at rest at the point where x = 0.3
Write down the general solution of the differential equation.
Find x in terms of t.
State the period of the motion and find the maximum speed of P.
5 marks
Show answer
a) x = A cos 4t + B sin 4tb) x = 0.3 cos 4tc) period π/2 s; maximum speed 1.2 m s-1
2
A particle P moves on a straight line. At time t seconds, the displacement of P from a fixed point O on the line is x metres. The acceleration of P is always directed towards O and has magnitude 25|x| m s−2.
When t = 0, P passes through O moving in the direction of increasing x with speed 3 m s−1.
Write down a differential equation for the motion and hence show that x = 0.6 sin 5t
State the amplitude of the motion.
Find the exact time at which P first reaches the point where x = 0.3, and the exact speed of P at that moment.
6 marks
Show answer
a) d2x/dt2 = -25x, giving x = 0.6 sin 5t (shown)b) 0.6 mc) t = π/30 s, speed 3√3/2 m s-1 (2.60 m s-1)
3
Each of the following differential equations models the displacement x of an oscillating system at time t.
For each equation, state whether the system is lightly damped, critically damped or heavily damped, and write down the general solution.
d2xdt2 + 6dxdt + 9x = 0
d2xdt2 + 6dxdt + 5x = 0
d2xdt2 + 6dxdt + 13x = 0
6 marks
Show answer
a) critical damping; x = (A + Bt)e-3tb) heavy damping; x = Ae-t + Be-5tc) light damping; x = e-3t(A cos 2t + B sin 2t)
4
The displacement x metres of a particle P from a fixed point O at time t seconds is modelled by
d2xdt2 + 2kdxdt + 25x = 0
where k is a positive constant.
Find the range of values of k for which the motion is lightly damped, and the value of k for which it is critically damped.
Given that k takes the value for critical damping, and that when t = 0, x = 0.2 and P is at rest,
find x in terms of t,
show that, according to the model, P never passes through O.
7 marks
Show answer
a) light damping for 0 < k < 5; critical damping when k = 5b) x = (0.2 + t)e-5tc) 0.2 + t > 0 and e-5t > 0 for t ≥ 0, so x > 0 and P never reaches O
5
The pointer on a set of kitchen scales is flicked so that it moves away from its rest position. At time t seconds after it is flicked, the displacement of the pointer from its rest position is x mm, where
d2xdt2 + 5dxdt + 4x = 0
When t = 0, x = 0 and the pointer is moving with speed 60 mm s−1 in the direction of increasing x.
Explain why the motion of the pointer is heavily damped.
Find x in terms of t.
Find, according to the model, the greatest displacement of the pointer from its rest position.
Show that, according to the model, the pointer does not return to its rest position at any time t > 0
8 marks
Show answer
a) the auxiliary equation has two distinct real (negative) roots, -1 and -4b) x = 20e-t - 20e-4tc) 9.45 mm (at t = (1/3) ln 4)d) x = 20e-4t(e3t - 1) > 0 for t > 0
6
The front suspension of a mountain bike is being tested. At time t seconds, the displacement of the front axle above its equilibrium position is h cm, where
d2hdt2 + 2dhdt + 10h = 0
When t = 0, the axle is 12 cm below its equilibrium position and is moving upwards with speed 6 cm s−1.
Find h in terms of t.
Find the displacement of the axle 0.5 seconds after the test starts.
Find the time at which the axle first passes through its equilibrium position.
Describe the motion of the axle as t becomes large.
9 marks
Show answer
a) h = -e-t(12 cos 3t + 2 sin 3t)b) 1.72 cm below the equilibrium position (h = -1.72)c) t = (π - arctan 6)/3 = 0.579 sd) it keeps oscillating with period 2π/3 s but the amplitude decays like e-t, so the axle settles at its equilibrium position
7
A component in a machine is driven by a motor. At time t seconds its displacement from a fixed point is x cm, where
d2xdt2 + 2dxdt + 5x = 10 cos t
Find the complementary function for this differential equation.
Find a particular integral.
Hence write down the general solution.
Describe the motion of the component for large values of t, giving the exact amplitude of the motion.
9 marks
Show answer
a) x = e-t(A cos 2t + B sin 2t)b) x = 2 cos t + sin tc) x = e-t(A cos 2t + B sin 2t) + 2 cos t + sin td) the e-t terms die away, leaving x ≈ 2 cos t + sin t: oscillations of period 2π s and amplitude √5 cm, whatever the initial conditions
8
A small weight hangs on a spring. At time t seconds, the displacement of the weight above its equilibrium position is x cm. The motion is modelled by
d2xdt2 + 4dxdt + kx = 0
where k is a positive constant.
The weight is pulled down 6 cm below its equilibrium position and released from rest at time t = 0. Immediately after it is released, the acceleration of the weight is 174 cm s−2 upwards.
Find the value of k.
Find x in terms of t.
Find the displacement and the velocity of the weight when t = 0.4
Explain what the model predicts for the motion of the weight in the long term.
10 marks
Show answer
a) k = 29b) x = -e-2t(6 cos 5t + 2.4 sin 5t)c) x = 0.141 cm (above equilibrium); velocity 14.2 cm s-1 upwardsd) e-2t → 0, so the oscillations die away and the weight comes to rest at its equilibrium position
9
During a charity walk, people crossing a footbridge fall into step, which makes the bridge sway. At time t seconds, the sideways displacement of the centre of the bridge from its equilibrium position is x cm, where
d2xdt2 + 4x = 3 sin 2t
Find the value of the constant λ for which x = λt cos 2t is a particular integral of the differential equation.
Hence find the general solution of the differential equation.
When t = 0, the centre of the bridge is at rest in its equilibrium position.
Find the particular solution.
Find, according to the model, the displacement of the centre of the bridge when t = 10
Comment on the suitability of the model for large values of t.
11 marks
Show answer
a) λ = -3/4b) x = A cos 2t + B sin 2t - (3/4)t cos 2tc) x = (3/8) sin 2t - (3/4)t cos 2td) x = -2.72 cme) the t cos 2t term makes the amplitude grow without limit, which is unrealistic: in practice damping would limit the sway (or the bridge would fail), so the model is not suitable for large t
10
A particle P of mass 2 kg moves on a smooth horizontal surface, attached to a spring and a damper. At time t seconds, the displacement of P from its equilibrium position O is x metres. The spring exerts a force of magnitude 50|x| N on P, directed towards O. The damper exerts a resistance of magnitude λv N, where v m s−1 is the speed of P and λ is a positive constant.
Show that 2d2xdt2 + λdxdt + 50x = 0
Find the value of λ for which the motion is critically damped.
Given that λ takes this value, and that when t = 0, x = 0.5 and P is moving towards O with speed 4 m s−1,
find x in terms of t,
show that P passes through O, and find the greatest distance of P from O on the other side of O.
The damper is replaced so that λ = 30
Describe how this changes the type of motion.
12 marks
Show answer
a) 2 d2x/dt2 = -50x - λ dx/dt (shown)b) λ = 20c) x = (0.5 - 1.5t)e-5td) x = 0 at t = 1/3; greatest distance 0.3e-8/3 = 0.0208 me) the auxiliary equation then has two distinct real negative roots, so the motion is heavily damped: P returns towards O more slowly, with no oscillation
11
A marker buoy on a lake bobs up and down after a boat passes. At time t seconds, the height of the buoy above its equilibrium level is x metres. The motion is modelled by
d2xdt2 + 0.4dxdt + 4.04x = 0
When t = 0, x = 0.5 and dxdt = −0.1
Show that x = 0.5e−0.2t cos 2t
Show that successive highest points of the buoy are π seconds apart, and find the ratio of the height of one highest point above the equilibrium level to the height of the one before it.
Using |x| ≤ 0.5e−0.2t, find a value of T such that, according to the model, the buoy stays within 1 cm of its equilibrium level for all t > T.
Give one criticism of the model.
11 marks
Show answer
a) x = 0.5e-0.2t cos 2t (shown)b) stationary points are π/2 apart and alternate, so maxima are π s apart; ratio e-0.2π = 0.533c) T = 5 ln 50 = 19.6 sd) e.g. it ignores further waves from wind or other boats, which would keep the buoy moving
12
A parcel is placed gently on the platform of a spring weighing scale. At time t seconds after the parcel is placed on it, the platform has moved a distance x cm down from its unloaded position, where
d2xdt2 + 4dxdt + 20x = 40
When t = 0, x = 0 and dxdt = 0
Find the general solution of the differential equation.
Find the particular solution.
Show that dxdt = 10e−2t sin 4t
Find the exact value of the greatest distance that the platform moves down, and state the position at which the platform eventually settles.
The manufacturer changes the damping so that the model becomes d2xdt2 + cdxdt + 20x = 40, where c is a positive constant.
Find the exact value of c for which the motion is critically damped, and explain why the manufacturer might prefer this.
12 marks
Show answer
a) x = e-2t(A cos 4t + B sin 4t) + 2b) x = 2 - e-2t(2 cos 4t + sin 4t)c) dx/dt = 10e-2t sin 4t (shown)d) greatest distance 2 + 2e-π/2 cm (2.42 cm); settles 2 cm below the unloaded positione) c = 4√5; the platform then settles at 2 cm without overshooting or oscillating, so the reading is steady sooner
Your score
Answer the questions above and your score appears here.
Every question here is original and written by Robinson Tuition. It follows the Edexcel A-level Further Mathematics specification and suits AQA and OCR Further Maths too; this is not an exam-board paper.